IGNITION SWITCH - ORIGINAL YANMAR STYLE
Processing...

IGNITION SWITCH - ORIGINAL YANMAR STYLE

Code: HIS-52110

$74.88 $38.75 HOT

Stock Status:
Normally ships today
if orderd by 2pm CST

Qty

Product Description

•••••
IGNITION SWITCH - ORIGINAL YANMAR STYLE_

Switch includes 2 keys. Very heavy duty original Yanmar switch. Has the metal flap that keeps water & dirt out of key hole when not in use. Also has the momentary counter-clockwise position for glow plugs if you have them.
Instructions can be found Here

IS-52110

Repl. 194322-52110(old 194155-52110 )

Shop Notes: This style switch is a direct replacement switch. If your tractor did NOT originally have a glow plug then you will have a 3 terminal switch in your dash. The instructions below show how to wire up the switch for either style.


Instructions can be found Here


The switch can be a tight fit when installed on some of the smaller tractors. Be sure that your switch terminals are not going to touch the hour meter or it will cause a short circuit. If your lower dash panel is slightly bent(like someones knees hit it when getting on or off) then the switch may be angled up too close to the hour meter. You may need to pull the dash back outward to give you room.


Repl. 194322-52110(old 194155-52110 )

WARNING!- This switch will fit ALL "YM" series Yanmars. Will NOT fit most of the "F" series (FX22, F215, F255, etc); because the wiring pigtail is soldered to the switch on those models. USE THIS SWITCH for those models.