Yanmar tractor tools

Home

Yanmar Tractors

Parts

Order Status

Checkout

When using our injector puller, be sure to saturate the area around the injector with WD-40 or similar penetrating oil for 15 to 20 minutes before you try to remove the injector. This will help brake down the grime that is holding the injector in place and help it come out easily.

Have a tractor that is hard to start, runs rough, or smokes a lot? It could be caused by low compression. With a compression tester you can easily find out and fix the problem. No more guessing.

If you are having trouble lifting heavy loads with your loader or three point hitch it may be because your relief valve is set too low. You can easily find out with our Hydraulic Gauge Kit. Install the gauge and leave it on your tractor to quickly diagnose problems or check stsyem operation. Or, install the gauge, run your test, and remove it in under 5 minutes. Most Yanmar Tractor hydraulic systems are set at 2200psi.

Need more help? Feel free to email us or give us a call. We will be happy to help.


	Sales & Rentals! We know that there are some jobs on the Yanmar tractor that could be made a lot easier and some products that could be made a lot better. We are proud to introduce the 1st of our new line of tools for Yanmar tractors to do just that. You will only find these tools here. We designed them, we built them, and there are many more interesting items on the way. Injector Puller in stock If you have ever tried to remove an injector from a Yanmar engine you understand the need for a tool like this. Our uniquely simple design will allow you to easily remove injectors from any "YM" series (YM1500, YM2000, YM3220, etc) Yanmar tractor engine in minutes. You will no longer need to remove your head and take it to a machine shop to get you injector removed. Injectors can be removed with the head on the engine or with the head off of the engine. Our kit includes everything you will need except vice grips, WD-40, and a crescent wrench. A Hoye Exclusive Tool! Compression Tester in stock Ever try to find a compression tester for a Yanmar tractor engine? It used to be next to impossible. Our new kit includes a high quality diesel compression gauge with quick disconnect couplings, our Yanmar engine adaptor, and any necessary hardware. Just remove your injector using our injector remover tool, install the adaptor, hook up the gauge and your ready to test. Easily diagnose engine damage, low compression, etc. Installs in 5 minutes. Adaptors Made In The USA. A Hoye Exclusive Tool! Hydraulic Pressure Tester in stock If you needed to check your hydraulic system pressure in the past you would need to cut into your high pressure line, weld on a fitting, and install a gauge. Not any more! We are happy to introduce our "hack free" Yanmar tractor hydraulic pressure gauge. This kit includes our Patent Pending adaptor plate, any necessary mounting hardware, and a high quality liquid filled pressure gauge. Easily diagnose loader problems, pump failure, set relief valve pressures, and more. This gauge can be installed and removed or installed and left on. The hydraulic system works completely normal while it is attached. Gauge can swivel 360 degrees so you can read it from the operators seat. Installs in 5 minutes and can be removed in 5 minutes with no damage or modification to your existing components! Fits all "YM" series yanmar tractors except those with power steering. 100% Made In The USA. A Hoye Exclusive Tool! *Hydro*Guard System Limited Quantities In Stock! Ever hear the horror stories about someone unhooking a loader on a Yanmar tractor and busting their hydraulic pump? This is caused by excessive back pressure in the hydraulic lines. If the oil has nowhere to go, something has to give. It is almost always the pump casing or the pump shaft. Either will cost you around $400 to replace. Our Patent Pending system installs in 5 minutes with no modification to your tractor or pump in any way and will protect your pump from these conditions. Includes the *HydroGuard* system, all necessary hardware, and installation instructions. Fits all "YM" series yanmar tractors except those with power steering. 100% Made In The USA. A Hoye Exclusive Tool! Even more interesting products coming soon!

Back To HomePage