REPAIR SLEEVE
Processing...

REPAIR SLEEVE

Code: HAS-6064

$22.45

Stock Status:
Normally ships today
if orderd by 2pm CST

Qty

Product Description

•••••
REPAIR SLEEVE

USE THIS SLEEVE IF THE SEALS HAVE WORN GROVES IN THE HOUSING OR IF YOUR HOUSING IS ROUGH OR RUSTED. THIS WILL BRING THE SEAL AREA UP TO 64MM SO YOU WILL NEED THE FOLLOWING SEAL INSTEAD OF YOUR ORIGINAL SEALS--

YOU MUST USE THIS SEAL-- AS-3110

Shop Notes: TEST FIT YOUR REPAIR COLLAR INTO THE LOWER HOUSING BEFORE INSTALLING ANYTHING.

Some of Yanmar\'s lower castings are a little tighter than others for some reason. Most of the time the repair collars fit right into the lower castings without any problem but some lower castings will have to be opened up a little bit. Most of the time it amounts to just cleaning up the rough casting edges with a die grinder. It does not have to go to a machine shop or be super precise because nothing actually fits in that hole. It just has to be made big enough to allow the collar to pass through.

WARNING!- THIS WILL BRING THE SEAL AREA UP TO 64MM SO YOU WILL NEED THE FOLLOWING SEAL INSTEAD OF YOUR ORIGINAL SEALS--

YOU MUST USE THIS SEAL-- AS-3110