HYDRAULIC PUMP RELIEF VALVE - KIT
Processing...

HYDRAULIC PUMP RELIEF VALVE - KIT

Code: HHPRVK

$49.84

Stock Status:
In Stock

Qty

Product Description

•••••
HYDRAULIC PUMP RELIEF VALVE - KIT


INCLUDES:
1 HIGH PRESSURE RELIEF VALVE
1 16,000 PSI TEE FITTING
2 HIGH PRESSURE COMPRESSION FITTINGS







Shop Notes: 15 Minute install!. This kit makes protecting your expensive hydraulic pump a breeze! Just cut a small section out of your high pressure steel line using a tubing cutter (available at any local hardware store for about $10). Use the included fittings to attach an inline pop-off valve. No welding. No soldering. No leaks. No mess. Feel safe knowing that, if anything goes wrong with your hydraulic system, your pump will be saved. This is also a great way to add a gauge to monitor hydraulic system performance. Just remove the pop-off valve and install a gauge when needed.

The relief valve must be set before using. To set the relief valve: Use an allen wrench to turn the valve (inside of the brass fitting) clockwise just to the point that  no oil is leaking during normal use. Clockwise = higher pressure. Counter-clockwise = lower pressure.

WARNING!-
Measure the diameter of your steel pressure line first. This kit will fit all of the standard Yanmar pressure lines which are 12mm diameter. We can also get a larger fitting if you are using this on something where the steel pressure line is larger.

CAUTION! When this valve opens it will allow oil to spray out at a pretty high volume & pressure and the oil might be hot. You will want to attach a hose to the relief valve so that the oil ends up somewhere safely (like, preferably, back to the transmission or all the way to the ground). You don't want the valve pointing at you, or someone else, or the pets, or your wife's flowers, for example.