GLOW PLUG (THERMO-START PLUG)
Code: HTS-1
SKU: 129233
Product Description
•••••
THERMO-START PLUG
How Does this work? Read This
SHOP NOTE:
THE NEW GLOW PLUG WILL NEED TO BE CYCLES 10-20 TIMES TO BLEED THE AIR OUT OF THE FUEL LINE BEFORE IT WILL START BURNING THE DIESEL. CYCLE IT ON 10 SECONDS THEN WAIT 20 SECONDS, ON 10 SECONDS, OFF 30.... 10 TO 20 TIMES.
TS-1
Shop Notes: You can also get a small hose barb to screw into the top of this if you would rather not just push the hose down over the threads. Both ways will work just fine.
