Weld In Wheel Disc (Rear 16")
1/4" thick steel. Laser cut bolt
holes to fit many of the Yanmar 6 bolt rear wheels.
Use with our hoops below or your own wheels
APPX 4.75" bolt
spacing. 3.5" pilot hole. 0.5" bolt holes
Contact us to be sure these will fit your model if in
So how do I use it? You just buy pretty much any wheel that will fit the
tire that you want to use. You do not need to worry about the bolt
pattern. You then cut out the old bolt pattern, center this disc in your
old wheel, and have a local welding shop weld it in.
Copyright © 2021 Hoye Tractor Parts Inc. All rights reserved.
Yanmar is a registered trademark of YANMAR Co. Ltd. Any appearance of the Yanmar name, Yanmar logo, or Yanmar part numbers are for reference purposes only and does not imply that the part is a genuine Yanmar part.
- Important Safety Warning! -