Weld In Wheel Disc (Front 14")

Weld In Wheel Disc (Front 14")

Code: HWFD-C14


Stock Status:
Normally ships today
if orderd by 2pm CST


Product Description

3/16" thick steel. Laser cut bolt holes to fit most of the Yanmar 6 bolt front wheels.
APPX 5.9" bolt spacing. 3.5" pilot hole. 5/8" bolt holes

Contact us to be sure these will fit your model if in doubt

So how do I use it? You just buy pretty much any wheel that will fit the tire that you want to use. You do not need to worry about the bolt pattern. You then cut out the old bolt pattern, center this disc in your old wheel, and have a local welding shop weld it in.