Knowledgebase
Hoye Tractor Parts > Contact Us > Knowledgebase

Search help:


Starter Solenoid Wiring

Solution

Please see attached image.

NOTE THE POSITION OF THE LITTLE WIRE STRIP! It must connect to the terminal going to the starter. That is how you tell which wire goes where. You can not just say 'my battery hooked up to the terminal on the top when the ignition switch wire was on the left'. The old solenoids could be made either way.  

YOU MUST HOOK THE STARTER WIRE TO THE TERMINAL ATTACHED TO THE LITTLE STRIP!!!

starter solenoid wire terminal location solenid selo

nid selonoid selonode

 

 

Also check out our article on testing a starter below

http://www.hoyetractor.com/starter-test.htm

 

 

Attachments:
ss-511.jpg ss-511.jpg
ss-511.jpg ss-511.jpg

 
Was this article helpful? yes / no
Related articles Testing A Starter
Solid state regulator to replace mechanical one
Article details
Article ID: 76
Category: Knowledgebase
Date added: 2012-02-29 15:07:17
Views: 4515
Rating (Votes): Article rated 4.6/5.0 (19)

 
« Go back