Hoye Tractor Parts Contact Us Knowledgebase
VR-522 CONTINUITY CHECK

VR-522 CONTINUITY CHECK

The service manual describes a test for the VR-522 regulator. In it there is a chart to test continuity between terminals. It needs to be tested using an ohm meter set at 20K or higher. it will not test right on the "beep" setting.

voltage regulator
Was this article helpful? Yes | No

Article Details

Article ID:
53
Category:
Knowledgebase
Date added:
2010-09-22 12:48:06
Views:
2,385
Rating (Votes):
(23)

Related articles